Linear Static Analysis of Truss:
Perform linear static analysis on a truss model.
N4W101: Basic Linear Static and Normal Modes Analysis For MSC/NASTRAN for Windows
Linear Static Analysis of Truss:
Perform linear static analysis on a truss model.
Linear Static Analysis of a Cantilever Beam (SI Units):
Perform linear static analysis on a cantilever beam model.
Linear Static Analysis of a Simply-Supported Stiffened Plate:
Perform linear static analysis on a stiffened plate model.
Rigid Element Analysis with RBE2 and CONM2:
Conduct linear static analysis on a rigid element.
Cantilever Beam Under Multi-Loadings:
Apply subcases for a linear static analysis.
Modal Analysis of a Simply-Supported Stiffened Plate:
Manually convert a linear static analysis input file to normal modes analysis input file.
N4W103: MSC/NASTRAN for Windows Nonlinear Analysis
Geometric Linear Analysis of a Cantilever Beam:
Demonstrate the use of geometric linear analysis, observe the behavior of the cantilever beam under four increasing load magnitudes and generate a displacement versus subcase plot from the result.
Linear Buckling Load Analysis (without spring):
Create a finite element representation of a cantilever beam in compression, without a spring and demonstrate the use of linear buckling analysis.
Linear Static Analysis for a 3-D Slideline Contact:
Demonstrate the use of slideline contact, run an MSC/NASTRAN linear static analysis then create an accurate deformation plot of the model and understand the linear behavior of the model.